center image
Sales & Customer Service
Phone: (419) 591-3770
1-888-MATWELD
 
    Fax: (419) 599-3630
customerservice@matweld.com
ACCESSORIES
DRILL BITS        AUGER BITS       IMPACT SOCKETS
GRINDING STONES        ABRASIVE BLADES
TRANSMISSION HOSES    HOSE REELS
 

 

Power Units

00100K Dual Circuit Power Unit
02050K 5 GALLON POWER UNIT
02900A DIESEL POWER UNIT
03000_HYDRAULIC_MANIFOLD_CIRCUIT
03700A Electric Power Unit with Hose Reel
05500 TWIN POWER UNIT w GENERATOR
06300 POWER UNIT MOBILITY CART
06500 HYDRAULIC INTENSIFIER
06600 POWER UNIT TRANSPORT CART
06700 MOBILE DIESEL POWER UNIT
09800 TRACK ROVER
00100K DUAL CIRCUIT POWER UNIT

The Railtech Matweld Dual Circuit Power Unit is designed to deliver two 5 GPM or one 10 GPM circuits at 2000 PSI. A power unit-mounted hose reel, with a 50 foot hose, is available, as well as various carts and provisions to move the machine manually, or power, assisted.

 

 

Weld Shears

05000_Hand-Pump_Weld_Shear
05100A_Weld_Shear
05100B_Weld Shear
05000 HAND PUMP WELD SHEAR

The Railtech Matweld Hand Pump Weld Shear is a self-contained Hydraulic Weld Shear. The adjustable hold downs are self-locking and will assure a clean safe cut. The average cycle time is 30-45 seconds to shear a weld. The hand pump model can be converted to operate with the Railtech Matweld Power Unit with very minor modifications.
 

 

Grinders

00600_8in_Cup_Stone_Grinder
00700_Surfacing_Guide_Grinder
04600_Straight_Stone_Grinder
04800 Cup Stone Grinder
05400 Angle Grinder
05900 Frog-Profile Grinder
06000_Profile_Grinder
06950_Multipurpose_Grinder
06950A_Multipurpose_Grinder
07500_Chamfer_Tool
09200A Frog Grinder
00600 8" CUP STONE GRINDER

The Railtech Matweld 8" Cup Stone Grinder is designed for use in grinding the tops of frogs and rail. The unique stone adjustment feature allows the operator to easily adjust the guard as the stone wears without the need for wrenches. The double handles give the operator complete control of the tool.
Note: Model 00600C has factory installed Type 6 Stone Adaptor (00733-Kit) for use exclusively for a type 6 stone (00797).
 

 

Rail Saws

00800A Hydraulic Rail Saw
03900A Reversing Rail Saw
00800A RAIL SAW

The Railtech Matweld Rail Saw is a hydraulic powered abrasive rail saw that uses a 14" or 16" diameter blade to cut rail. A sturdy pivot arm securely clamps to the rail and guides the saw during operation. Free axis movement of the tool allows cutting on either side of the rail and clean separations average less than two minutes. Sturdy construction and quality components ensure low maintenance and long life of the tool.
 

 

Drills

01500 Rail Drill
03500_Rail_Drill
Arrowhead Insert Drill Bit
Rail Templates
01500 RAIL DRILL

The Railtech Matweld Hydraulic Rail Drill is a small, dependable and efficient maintenance tool that offers cost-effective operation under adverse conditions. Simple clamp and height adjustment mechanisms allow quick set-up time on a variety of track configurations. The drill has a quick-set indexing bar that provides accurate hole spacing. Standard flat spade bits are used and can be changed in seconds without the need for wrenches. The rail drill includes a lubrication system.
 

 

Impacts

01600A 5GPM 1in Impact Wrench
02500 10GPM 1in Impact Wrench
04500D Half Inch Hydraulic Drill and Impact Wrench
01600A 5 GPM 1" IMPACT WRENCH

The 1" Impact wrench is capable of handling the toughest jobs. Crossing, frog or track bolts are no problem for this rugged tool. Optional handles allow the operator to modify the tool to provide an efficient, safe and ergonomic work position for the task at hand. A torque adjustment knob fine-tunes torque from 0-3500 ft/lb. Designed for 5 GPM operation, permits simultaneous use of another 5 GPM tool on the Railtech Matweld dual circuit power unit, maximizing efficiency of a multi-man crew.
 

 

Tampers

08200 Tamper
08200 TAMPER

The Railtech Matweld Hydraulic Tamper is equipped with torsion dampened handles which reduce the vibration level to a minimum. This is an excellent multi-purpose tool that can tamp, cut asphalt or break concrete.
 

 

Spike Drivers

08300 Spike Driver
08300 SPIKE DRIVER

The Railtech Matweld Spike Driver is equipped with torsion dampened handles which reduce the vibration level to a minimum. An excellent heavy duty tool designed to drive spikes and hairpins into the toughest ties in seconds.
 

 

Spike Pullers

01100A_Spike_Puller
01100 SINGLE STAGE SPIKE PULLER01100A TWO-STAGE SPIKE PULLER
01100AS SPIKE PULLER w/SAFETY TRIGGER01100HP SPIKE PULLER w/HAIR PIN JAWS


The Railtech Matweld Spike Puller is a lightweight powerful maintenance-of-way tool generating 13,000 pounds of pulling force. Safe two-speed design ensures operators grab the spike in a slow speed, avoiding jerking motions common with most spike pullers. The efficient design enables the operator to grab the spike from either side of the rail without repositioning, pull and automatically drop the spike at the top of the stroke in one motion. All moving parts are fully enclosed for safety. The jaws can be changed without special tools in minutes at the work site.
 

 

Other Tools

01200 Spring Anchor Applicator
02800A 60 Ton Hydraulic Bridge Spreader
03100C Hydraulic Rail Puller
01200 SPRING ANCHOR APPLICATOR

The Railtech Matweld Spring Anchor Applicator is a lightweight and labor saving tool for the maintenance-of-way crew. A safe and quick method of installing spring anchor clips, which does not require "brute force" for clip installation. The tool utilizes a pivoting foot design with seven tons of force available to install the toughest clips. Operators will appreciate the clear view during installation.